Glues & Adhesives


E6000 Spray Adhesive View larger

E6000 Spray Adhesive


New product

  1. Low odor.
  2. Clean-up with water.
  3. Use on multiple surfaces.
  4. Extremely strong, flexible and resists water.
  5. Not harmful - contains no VOCs, harsh chemicals or propellants.
  6. Photo safe.
  7. Super easy to use - just spray.
  8. Dries translucent.

More details

$18.00 tax incl.

    E6000 Spray Adhesive

    E6000 Spray Adhesive is a permanent, multi-purpose latex-based adhesive without the toxic smells, fumes or unhealthy side effects.
    It is strong, flexible, water-resistant, resists bleed-through and yellowing and works well on most all materials.

    Follow these simple directions when using E6000 Adhesive Sprays:
    1. Shake well before use.
    2. Protect work area from over-spray.
    3. Point spray nozzle away from face.
    5. Hold bottle 20-30cm away from surface and Spray.

    PAPER, PHOTOS, CARDBOARD & FOIL: Spray a thin coat to one surface. Join surfaces. Apply pressure periodically, ensuring secure contact. Dry 1-3 minutes.

    POROUS MATERIALS (including foams and Styrofoam):
     Spray a heavy coat to both surfaces to be joined. Mate surfaces together. Allow to dry. Maximum strength usually achieved in 1-5 hours. Up to 12 hours for styrofoam.
    to 12 hours for Styrofoam.

     Spray a light coat to one surface. Mate surfaces together. Allow to dry.

    IMPORTANT – CLEAN NOZZLE AFTER EACH USE: To prevent clogging, remove and rinse nozzle/straw. Pump warm tap water through sprayer until all adhesive is cleared out. Then dry, replace in the bottle, secure cap. *Maximum strength may not be reached for 1-5 hours. Styrofoam may require an overnight cure.

    Content: 118.2ml

7 other products in the same category: